Are you are interested in CAR ASYST and want to test the app for free?
With the free 30-day demo version you can use simulated data (Audi Q7) to get to know CAR ASYST’s app features. Additionally, all owners of the VAS 5054A adapter have the possibility to test CAR ASYST directly with a real vehicle.
Follow these steps to use your free 30-day demo version (Android)
- Download the CAR ASYST APP from the Google Play Store
- Request Demo
Confirm your email address (Double-Opt-In) to receive your key for the CAR ASYST Demo Version.
- After starting the app you can enter the key by navigating to Settings – “Product-Keys” and click on “CARDATA License” to enter your personal demo product key.
Please note: A internet connection is required to enter your license key
- Once the licensing process is completed, the app will automatically start in simulation mode (Audi Q7)
- CAR ASYST is now ready for you to begin your Trial.
Do you have a VAS5054 adapter available? – Test on a real vehicle!
To use the demo version with your VAS5054, you first have to connect your smartphone or tablet with the VAS5054. To do this, go to the main menu and click “Interface” and “Select Interface“.
Select your desired adapter by clicking “Select Interface” in the dropdown menu. Once in the Select Interface screen, choose your device and then hit “back” and the app will connect to the adapter. This will cause the adapter to be updated, which has no implications for other applications that use this adapter.
CAR ASYST APP is now ready to be tested with a real vehicle!
What features are supported by the 30-day demo version?
The following six menu entries are available with the following restrictions:
- Vehicle Functions
Using the simulation adapter:
Vehicle error memory can be read but not deleted. The creation of a vehicle report is possible as well. The transport mode can not be activated or deactivated.
Using a VAS5054 adapter:
The creation of a vehicle report is possible, but the error memory entries are not shown. The transport mode cannot be set. To see how error memories are presented, please use the simulation mode.
- ECU Functions
All found ECUs are shown. In the demo mode only the engine ECU can be used. Reading the error memory and using the diagnostic test mode is prevented. Only 3 measured values are available. They can be shown either textually or graphically.
- Measured Value Configuration
Recording vehicle internal bus systems („Mirroring“ -> CAN, FlexRay, LIN) cannot be configured in the demo mode. Three measured values from the engine ECU are available. Setting triggers or other sensors has no restrictions.
- Recorded Data
No restrictions exist.
This feature has no restrictions in the demo mode.
The developer setting are not viewable in the demo-mode. All other menu entries are available.